KROHNE OPTIWAVE 5200 FOUNDATION FIELDBUS - Manual (Page 26)

4
OPERATION
26
OPTIWAVE 5200 C
www.krohne.com 09/2013 - 4002500101 - AD FF OPTIWAVE 5200 R01 en
ALARM_STATE
Alarm State
R A discrete enumeration which gives an indication of whether
the alert is active and whether it has been reported.
Uninitialized
Setting:
Uninitialized / Clear - reported / Clear - not reported / Active -
reported / Active - not reported
TIME_STAMP
Time Stamp
R The time when evaluation of the block was started and a
change in alarm/event state was detected that is unreported.
The time stamp value will be maintained constant until alert
confirmation has been received – even if another change of
state occurs.
Uninitialized
Setting:
MM / DD / YY (Month / Day / Year)
HH:MM:SS (Hour:Minute:Second)
SUB_CODE
Subcode
R An enumeration specifying the cause of the alert to be
reported.
VALUE
Value
R The value of the associated parameter at the time the alert
was detected.
FD_MAINT_MAP FD_MAINT_MAP FD_MAINT_MAP FD_MAINT_MAP
Maintenance Map Maintenance Map Maintenance Map Maintenance Map
RW This parameter enables or disables conditions to be detected
as active for this alarm category.
Nothing mapped
Setting:
• (00) Check Function
• (01) Cond01
• (02) Cond02
• (03) Cond03
• (04) Cond04
• (05) Cond05
• (06) Cond06
• (07) Bad Measurement quality
• (08) Signal Strong
• (09) Signal Weak
• (10) Empty Spectrum invalid
• (11) Sensor No Signal
• (12) Sensor Microwave Error
• (13) Temperature Above +75°C
• (14) Temperature Below -35°C
• (15) Overfill Warning
• (16) Level Lost warning
• (17) Temperature out of range (warning)
• (18) Local operation
• (19) Overfill Error
• (20) Level lost error
• (21) Temperature out of range Error
• (22) Converter Voltage Error
• (23) Converter ROM Error
• (24) Converter RAM Error
• (25) Converter EEPROM Error
• (26) Sensor not compatible
• (27) Internal Communication Error
• (28) Sensor Voltage Error
• (29) Sensor ROM Error
• (30) Sensor RAM Error
• (31) Sensor EEPROM Error
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value