KROHNE OPTIWAVE 5200 FOUNDATION FIELDBUS - Manual (Page 32)

4
OPERATION
32
OPTIWAVE 5200 C
www.krohne.com 09/2013 - 4002500101 - AD FF OPTIWAVE 5200 R01 en
DIAGNOSTIC_
SIMULATE_VALUE
Diagnostic Simulate
Value
RW Allows the conditions to be manually supplied when simuation
is enabled. The simulate jumper is required for simulation to
be enabled.
Uninitialized
Setting:
• (00) Check Function
• (01) Cond01
• (02) Cond02
• (03) Cond03
• (04) Cond04
• (05) Cond05
• (06) Cond06
• (07) Bad Measurement quality
• (08) Signal Strong
• (09) Signal Weak
• (10) Empty Spectrum invalid
• (11) Sensor No Signal
• (12) Sensor Microwave Error
• (13) Temperature Above +75°C
• (14) Temperature Below -35°C
• (15) Overfill Warning
• (16) Level Lost warning
• (17) Temperature out of range (warning)
• (18) Local operation
• (19) Overfill Error
• (20) Level lost error
• (21) Temperature out of range Error
• (22) Converter Voltage Error
• (23) Converter ROM Error
• (24) Converter RAM Error
• (25) Converter EEPROM Error
• (26) Sensor not compatible
• (27) Internal Communication Error
• (28) Sensor Voltage Error
• (29) Sensor ROM Error
• (30) Sensor RAM Error
• (31) Sensor EEPROM Error
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value