KYORITSU 8113 User Manual
Page 14
Advertising
― 12 ―
7-2 Model 8008 MULTI-TRAN
Model 8008 MULTI-TRAN is designed to measure AC current
higher than 200A or large bus-bars ( up to 150×100mm) and
conductors(up to 100mm diameter).
(1) As shown in Fig.5, open the
transformer jaws of Model
8113 and close them over
the pickup coil of Model 8008
MULTI-TRAN to measure up
to 2000A AC.
(2) Since the input to output
ratio is 10 to 1, multiply the
output by 10 and take the
current reading (Fig.5).
Model 8004 MULTI-TRAN is
also available for AC current
measurements up to 1000A on
a conductor of max. 55mm
diameter.
Note :
Model 8004 and 8008
are not designed for
DC current
measurements.
Advertising