KYORITSU 8113 - Manual (Page 6)

― 4 ―
This instruction manual contains warnings and safety rules that
must be observed by the user to ensure safe operation of the
instrument and retain it in safe condition.
Therefore, read these operating instructions thoroughly and
completely before using the instrument.
Pay particular attention to all WARNINGS and CAUTIONS in
this instruction manual.
WARNING indicates warning to avoid an electrical shock and
CAUTION indicates cautions to avoid damage to the instrument
and make accurate measurements.
WARNINGS
1. If the instrument shows the following conditions, do not try to
make measurements and have the instrument checked for
inspection or repair.
Instrument shows visual damage.
Test leads are damaged.
Instrument can not be operated for intended measurements.
Instrument has been stored for long period of time
under abnormal conditions.
Instrument has been subjected to severe shocks and
vibrations.
2. The transformer jaws are made of metal and their tips are not
insulated.
Be especially careful about the hazard of possible shorting
where the equipment under test has exposed metal parts.
3. Do not make measurements in an explosive atmosphere
(i.e.in the presence of flammable gasses or fumes, vaper or
dust)
4. Never ground yourself when conducting electrical tests. Do
not touch exposed metal pipes, outlets, fixtures, etc, which
3. Safety Notes