Error codes – Martel Electronics BetaGauge PIR PRO User Manual
Page 19
Advertising
![background image](/manuals/369771/19/background.png)
Error Codes
Error
Description
101
A non-numeric entry was received where it should be a
numeric entry
102
Too many significant digits entered
103
Invalid units or parameter value received
105
Entry is above the upper limit of the allowable range
106
Entry is below the lower limit of the allowable range
108
A required command parameter was missing
109
An invalid pressure unit was received
117
An unknown command was received
120
The serial input buffer overflowed
121
Too many entries in the command line
122
Pressure module not connected
17
Advertising
This manual is related to the following products: