Viii. current output – Martel Electronics M2000 User Manual
Page 7
7
VIII. CURRENT OUTPUT
1.
To output currents of up to 100mA press the
key until the milliamp output
range appears on the display.
2.
Operation of the mA output is similar to voltage, operating where output values can be
selected or manipulated by using the numeric data entry keys or cursor controls.
NOTE: Standby mode is activated if the voltage compliance for a given output current is
exceeded. Trying to output a current with no connection made to the output jacks will
force the M2000 into standby mode.
See Figure 4.
3. The M2000 has a typical voltage compliance of 10V so that 4-20mA application loads up
to 500 ohms can be driven. At maximum current (100mA) the maximum load is 100
ohms.
V/mA
Figure 3
Connections for Outputting DC Voltage
Figure 4
Connections for Outputting DC Current