NSi Industries DG120 Old Series - Manual (Page 7)

DELETE: If you choose to delete a schedule, simply
modify the HOURS and MINUTES, until the time dis-
play reads --:--. This will occur after scrolling past
11 P.M. with the HOUR key and “59” with the MIN
key. Then press ENTER to delete the event.
OVERRIDE
In order to temporarily change the current ON or OFF
status of a load, simply press the override key. This
can only be done when the unit is in the RUN mode.
The load status will flash indicating that this is a
change from a scheduled event.
In order to cancel the override, press override key
again.
7
MLI-89(D)
TORK ®
1 GROVE STREET, MT. VERNON, NY 10550 TEL: 914-664-3542
FAX: 914-664-5052
MODE
KEY S E T T I N G K E Y S
DG100/120
PROGRAMMING GUIDE
RUN
CLK Set Clock
DATE Set Date
SET Schedule Set
OVER
RIDE
SP
DAY
DAY
MONTH
HOUR MIN ENTER
DATE
DAY HOUR MIN
YEAR ENTER
ON
OFF
ENTER
Run Mode
Description