NSi Industries DGS180 Old Series - Manual (Page 6)

Press mode key until display shows DATE.
Press MONTH key to select month. Press DATE key
to set today’s date. Press YEAR key to set present
year. Press ENTER key. Unit now stores present
date.
Note: If unit has correct entry for the calendar, then
the unit will go into the SET mode. If the calendar has
an incorrect entry, then the unit will stay in the DATE
mode, with MM--YY displayed, signifying that the
date does not correspond with the month, and/or
year, i.e. Feb. 31,1996. If this occurs, set the correct
date, and then press ENTER.
TO SET SCHEDULE
For convenience, write out your desired schedule on
a separate piece of paper. If display does not show
SET then press MODE key until display shows SET.
The display will show 12:00 AM.
1. Press HOUR key to set hour (check AM/PM)
2. Press MIN key to set minutes
Note: Minutes advance in intervals of 5 because
scheduling execution has 5 minute resolution.
5
DATE
AM
SET
3. Press SlG/SEC key to set signal 1 or signal 2.
(Actual duration of signals will be set later.)
4. Press ENTER key to store the signal event.
REPEAT ABOVE STEPS FOR ALL DESIRED SIG-
NAL EVENTS
Note: After each event is entered, the clock (in the
set mode only) automatically advances 5 minutes.
5. Press MODE key to return to RUN mode.
TO SET SIGNAL DURATIONS
1. Press MODE key until display shows SIG 1 and
00.
2. Press SIG/SEC key to set duration time in sec-
onds (1-99).
3. Press ENTER key to store the information.
Display now shows SIG 2.
4. Again press SIG/SEC key to set duration time in
seconds (1-99). Press ENTER key.
TO SET SKIP DAYS
1. Press MODE key until display shows SP
2. Press DAY/MONTH key and SU starts flashing.
3. If you want Sunday to be a skip day, press SP
DAY key and SU will remain solid. Next day (MO)
will begin flashing. If you do not want Sunday to
be a skip day, press DAY/MONTH key to advance
to the first desired Skip Day. Then press SP DAY
key.
4. If you want to delete a previously set skip day, press
DAY/MONTH key to advance to that day - then
(when Flashing) Press SP DAY key to delete it.
Summary: SP DAY key sets a flashing day as a
SKIP day and also eliminates a constantly dis-
played day from Skip day status. DAY/MONTH
key advances the days.
6