NSi Industries ELC74 - Manual (Page 7)

5
configured as maintained . The momentary option is
intended for use with latching relays .
An ELC74 configured for momentary operation will
become a two-channel control . Relays 1 and 3 will
provide the ON pulses, and relays 2 and 4 will provide
the OFF pulses .
Use the NEXT key to continue set-up .
0.2 CLOCK FORMAT
Toggle between 12 HR (AM/PM) or 24 HR (00:00-
23:59) clock format using the +/- key .
Press the PROGRAM key to begin programming steps
in the TIME header .
1.0 TIME MODE
This mode is used for setting time, date and daylight
saving time .
Use the NEXT key to begin programming .
1.1 SET CLOCK
Use the + and - keys to modify the flashing item .
Use the NEXT key advance to the next flashing item .
Set current hours, minutes, seconds, and day of week .
Note: Display shows PM for times from Noon and later .
1.2 SET DATE
Use the + and - keys to modify the flashing item .
Use the NEXT key advance to the next flashing item .
Set current month, date, and year .