NSi Industries EWZ120 - Manual (Page 10)

ENTER and follow the same procedure above
to modify or review sunrise settings.
6. RUN MODE: The time, day, seconds, the load
status and AUTO is displayed.
8.0 OVERRIDE
OVR (Override) is effective in the AUTO mode
and the manual mode. OVR on the AUTO mode
is effective until the next event. OVR on the manu-
al mode is effective indefinitely.
9.0 EVENT (in the RUN mode) key is used to update
the load status It will execute the last scheduled
event. If there is no schedule programmed, the dis-
play will show —:—
10.0 NOTES:
1. MAN mode: Under this mode the unit disre-
gards the settings in the schedule mode and
remains in its manually set status ON or OFF.
NOTE: To resume regular schedule execution
press the mode key to return to AUTO mode.
2. Unit will go to RUN MODE automatically (except
on the MAN mode) if no key is pressed for five
minutes.
3. Clear all memory. All memory can be cleared
using the following procedure: While in the RUN
mode, press ENTER, display will show:
Use EVENT key to display:
8
ON
OFF
CLK DATE SCH AUTO MAN
ON
OFF
CLK DATE SCH AUTO MAN
EWZ101_120single 7/25/07 10:18 PM Page 10