NSi Industries 806D - Manual

FOR TECHNICAL SUPPORT: SOUTIEN TECHNIQUE : PARA COMUNICARSE CON EL SERVICIO TÉCNICO: [email protected] 877.230.7874
ONE YEAR LIMITED WARRANTY: If this product fails because of a manufacturing defect within one year after purchase, we will, at our option, either repair or
replace it at no charge. Our warranty does not cover damage caused by accident, abuse or misuse. We assume no further liability with respect to the sale or
use of this product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY.
We make no warranty with respect to the fitness of any goods for the users particular application. This warranty gives you specific legal rights, and you also may
have other rights which vary from state to state.
It is our intent to provide accurate and current specification information. However, in the interest of product improvement, TORK may alter the specifications or
constructional details without prior notice.
NSi INDUSTRIES, LLC • 877.230.7874 • www.nsiindustries.com
OUTDOOR 6 OUTLET DIGITAL TIMER
®
MODEL#:
806D
DESCRIPTION: ALL WEATHER OUTDOOR 6 OUTLET PROGRAMMABLE DIGITAL TIMER
CONTACT RATINGS: (FOR ALL 6 OUTLETS) Not to exceed - 125VAC 15A, 1875W General Purpose
INSTALLATION
1. Connect two pieces of yard stake together.
2. Please be sure the stake is firmly attached to the body.
3. Insert stake 6 inches into ground.
PROGRAMMING & OPERATING THE TIMER
PROGRAMMING AND OPERATING THE TIMER
1. FIRST TIME SET-UP: Connect power for 10 minutes then
press RESET button to clear all settings.
2. Press CLOCK button.
3. Press the DAY, HOUR and MIN buttons, to set current day and time.
4. Press ENTER or wait 10 seconds for auto save to complete.
PHOTOCELL/TIMER OPERATION
1. Press PHOTO CELL button and a crescent moon icon will appear.
Unit now set for ON AT DUSK and OFF AT DAWN operation.
2. For timed off function, press PROGRAM button then press HOUR button.
Choose between 1 and 12 for the hours after dusk for turn OFF.
TIMER OPERATION
1. Press TIMER button and a clock icon will be displayed.
2. Press the PROGRAM button: Program 1ON --:-- is displayed for the first ON event.
3. Press the DAY, HOUR and MIN buttons, to set the event time. Each press of the DAY button will advance the selection, from individual days, MO-FR, SA-SU, MO-SA, all days
MO-SU then back. Press the PROG button.
4. Program 1OFF --:-- is displayed for the first OFF event. Repeat step 3 for the OFF time.
5. The PROG button advances display between ON to OFF for a total of 7 ON/OFF pairs that can be programmed.
6. Press ENTER to save programs.
OVERRIDING TIMER SETTINGS
Press the ON/OFF button to override current programmed event. Normal operation resumes at the next regularly scheduled ON or OFF event.
A DIVISION OF NSi INDUSTRIES, LLC
LI-866
Day Hour Min
Clock On/Off Program
Enter
Photo Cell
Reset
Timer