Techne TC-3000G - Manual (Page 40)

38
Use the "Up Arrow" or "Down" Arrow"
keys to move to the step where you want an
increment or decrement temperature or time
Press "Enter" to go into edit mode.
Press "Pause"
The prompt line will change to flash between
'CHANGE STEP?' and 'YES' or 'NO'.
Press "Enter"
Now press the "Up Arrow" key
Number cycles 30
Step 94.0° C 00m30 max
Step 58.0° C 00m30 max
[ , to edit ]
Number cycles 30
Step 94.0° C 00m30 max
Step 58.0° C 00m30 max
[ CHANGE STEP ? ]
[ Yes or No ]
[ to delete step ]
[ ‘.’ to insert step ]
Use the "Alpha/numeric" keys to change the
values of the 'fst' line to the first
temperatures and/or times you require.
Press "Enter" after each field you change.
You will exit 'Edit Mode' when you reach the
end of the line.
Use the "Down Arrow" key to move onto
the "lst" line, meaning "last".
Press "Enter" to edit the step.
Number cycles 30
Step 94.0° C 00m30 max
fst 65°C 00m30 max
[ edit temperature ]
Step 94.0° C 00m30 max
fst 65.0° C 00m30 max
lst 55.0° C 00m30
[ , to edit ]
Number cycles 30
Step 94.0° C 00m30 max
fst 55.0° C 00m30 max
[ , to edit ]
Using the "Up Arrow" key the line will
toggle between grad, fst and step. Select
"fst" meaning "first".
Press "Enter" twice to go into edit mode.
[ to save ]
[ to delete step ]
[ ‘.’ to insert step ]