Thermo Fisher Scientific CyberScan pH 300/310 - Manual (Page 21)

18
6 M E M O RY F U N C T I O N
6.1 Memory Input
Your meter stores data in sets:
• pH and temperature
• mV (or relative mV) and temperature
For pH 300 meter : The pH 300 meter can store up to 16
sets of data in any combination of
values. For example, you can store
7 pH and 9 mV values.
For pH 310 meter : The pH 310 meter can store up to 50
sets of data in any combination of
values. In addition to the standard
data set, the pH 310 meter also
stores the date and time the reading
was stored.
To store a reading:
1. During any measurement function (MEAS), press MI
key to input any data into the memory.
2. MEM, “Sto” and memory number will flash. The
meter then returns to measurement mode.
See figure 17.
NOTE: If the memory is full, the first value stored
will be erased to create space for the new
value.
Figure 17 - Memory Input