Thermo Fisher Scientific CyberScan pH 300/310 - Manual (Page 26)

23
7.1 Advanced SET-UP Mode Overview
Press the SETUP key to enter Set up mode.
Press the MI/▲ or MR/▼ keys to scroll through sub groups.
pH 300 meter set up mode
P1.0: Memory clear
P1.0 Clear all stored readings
P2.0: Viewing previous calibration data
P2.1 View first calibration point (pH 1.68)
P2.2 View second calibration point (pH 4.01)
P2.3 View third calibration point (pH 7.00)
P2.4 View fourth calibration point (pH 10.01)
P2.5 View fifth calibration point (pH 12.45)
P3.0: Viewing electrode data
In pH measurement mode:
P3.1 pH electrode offset
P3.2 pH electrode slope
In mV (or relative mV) measurement mode:
P3.1 Relative mV offset
P4.0: Unit configuration
P4.1 READY indicator on or off
P4.2 Number of calibration points: 2, 3, 4 or 5
P5.0: Reset to factory default
P5.0 Reset to factory default settings