Thermo Fisher Scientific CyberScan pH 300/310 - Manual (Page 36)

33
P4.4 Selecting °C or °F
Available in pH 310 meter only
The pH 310 meter lets you select between °C and °F units
for temperature readings.
From measurement mode
1. Press SETUP key to enter Set Up mode.
2. Press the MI/▲ or MR/▼ keys to scroll through
subgroups until you view parameter P4.0.
3. Press the ENTER key four times to select parameter
4.4.
4. Press the MI/▲ or MR/▼ keys to toggle between °C
and °F.
5. Press the ENTER key to confirm selection and to
return to the subgroup menu. Press the CAL/MEAS
key to return to measurement mode.
See Figure 32.
Figure 32 - P4.4: Select temperature
units (pH 310 meter only)