Thermo Fisher Scientific Eutech CON 700 - Manual (Page 15)

11
See Section 8 – Calculating Temperature Coefficients.
Press .
Press or to select the desired value (0.00 to 10.0).
Press to confirm.
6.9 P3.6 t.nr (Normalization Temperature in ºC)
When Automatic Temperature Compensation is used, measurements
are adjusted by the temperature coefficient to the normalization
temperature. The default value is 25 ºC.
Press .
Press or to select the desired value (15.0 to 30.0).
Press to confirm.
6.10 P3.7 ACAL (Automatic Conductivity Calibration)
See Section 4.1 for more details on Automatic Conductivity Calibration.
Press .
Press or to select “Yes” (Automatic) or “No” (Manual).
Press to confirm.
6.11 P3.8 SPC (Single Point Calibration)
See Section 4.2 for details on Single Point & Multi Point Calibration.
Press .
Press or to select “Yes” (Single) or “No” (Multi).
Press to confirm.