Audient ASP8024 Large Format Recording Console - Manual (Page 27)

Operation Manual
27
Input Strip
© 8.21
1 This is the LONG
FADER which controls
the level of the LF signal.
2 This is the +10dB mark.
The fader is fully open at
this point and
introducing 10dB of
gain into the signal path.
LONG FADER (LF)
Located close to the
operator this fader operates
on the LF signal path and
is therefore mainly used for
creating the monitor mix
and the final stereo mix for
the title.
The fader is expected to
operate around the 0dB
mark with 10dB of gain in
hand allowing the signal to
be increased or decreased
in level.
When level setting start
with the fader in this
position then adjust the
input sensitivity control for
the correct level to optimise
the gain structure.
1
3
4
2
3 This is the 0dB mark.
This is the normal
operation position for
the fader.
4 With the fader here the
signal path is closed and
no signal will pass.