Audient ASP8024 Large Format Recording Console - Manual (Page 38)

Operation Manual
38
Master Section
© 8.21
MASTER FADER
The master fader is used to
control the stereo output of
the console. Unlike the
channel faders it is
calibrated with the 0dB
mark at the top as the main
purpose of this fader is to
create a fade out at the end
of a title.
Under normal operating
conditions the fader should
always be set at maximum.
If it has to be pulled back a
significant distance it
indicates that the levels to
the mix bus are too high
and should be reduced.
1
3
2
1 The MASTER FADER
controls the level of the
stereo output signal.
2 This is the 0db mark.
The fader is fully open at
this point.
3 With the fader here the
signal path is closed and
no signal will pass.