Audient ASP8024 Large Format Recording Console - Manual (Page 40)

Operation Manual
40
Master Section
© 8.21
STUDIO AND
FOLDBACK
CONNECTORS
These are the XLR
connectors for the Studio
Loudspeaker and the two
foldback outputs. Each
output is stereo, having a
left and right connector.
The console does not
contain any power
amplification and these
outputs should be
connected into a suitable
power amplifier for the
loudspeakers or
headphones in use.
The speakers may of
course be self powered in
which case connection
should be made to the
inputs on the loudspeakers.
1 STUDIO LOUDSPEAKER
. These carry the
outputs to the studio
loudspeaker system.
The output depends
upon the selection made
on the control surface of
the console.
2 FOLDBACK A output.
Foldback is normally
used as a feed to
headphones. The
output depends upon
the selection made on
the control surface of
the console.
3 FOLDBACK B output.
Foldback is normally
used as a feed to
headphones. The
output depends upon
the selection made on
the control surface of
the console.
3
1 2