Badger Meter ORION Classic (CE) - Manual (Page 10)

6
Install and Position the ORION AMR
Radio Endpoint
1.. Verify.that.the.installation.tether.is.wrapped.around.
the.ORION.radio.endpoint.
2.. Place.all.of.the.cables.in.the.valve.box,.underneath.
the.radio.endpoint.
3.. Place.the.radio.endpoint.and.mounting.bracket.into.
the.valve.box.
4.. Push.the.radio.endpoint.down.so.that.its.top.is.
about.one.to.two.inches.below.the.valve.box.cover.
Place.the.endpoint.
and.mounting.
bracket.into.the.
valve.box.
Place.the.cables.
below.the.
endpoint.
Push.the.
endpoint.
down.
Top.view.
of.endpoint.
and.
bracket.in.
valve.box.
Top.is.
about.two.
(2).inches.
below.the.
box.cover.
Reverse the AMR Radio Endpoint Mounting
Bracket
You.may.need.to.reverse.the.AMR.radio.endpoint.
mounting.bracket.in.order.to.fit.a.endpoint.into.a.valve.
box.or.position.it.higher.in.the.valve.box..To.do.so,.
follow.these.steps.
1.. Unscrew.the.endpoint.from.the.bracket.
2.. Carefully.move.the.installation.tether.to.the.inside.
of.the.bracket.
3.. Pull.the.leak.logger.from.the.valve.box,.through.the.
mounting.bracket.
4.. Remove.the.mounting.bracket.and.turn.it.over.
What.an.ORION.Permalog+.AMR.acoustic.leak.logger.
assembly.looks.like.when.installed:.
Water.Main.Pipeline
Street.Level
Box.Cover
ORION.Radio.
Endpoint
Valve.Box
Permalog.Leak.
Detector
Valve.Key
Valve