Dwyer DW-USB-LITE - Manual (Page 2)

USB DRIVER INSTALLATION
Windows
® XP/Windows Vista™:
Note: You must install the Configuration Software as instructed in the pre-
vious section before going through these steps.
1. Insert the data logger directly into a USB port on the computer.
Installation screens should automatically appear.
2. Follow the on screen instructions to complete the Configuration
Software Installation. If a compatibility error window appears, click
“Continue Anyway”. Note: This will not cause any adverse
changes/effects on your computer.
3. You can now begin using your DW-USB-LITE data logger by double
clicking on the EasyLog USB icon on your computers desktop.
Windows ® 98/Windows ® 2000:
Note: You must install the Configuration Software as instructed in the pre-
vious section before going through these steps.
1. Insert the data logger directly into a USB port on the computer. Installation
screens should automatically appear.
2. Follow the on screen instructions to complete the USB Driver Installation.
3. You can now begin using your DW-USB-LITE data logger by double
clicking on the EasyLog USB icon on your computer’s desktop.
MAINTENANCE
Upon final installation of the DW-USB-LITE Data Logger, no routine main-
tenance is required. Leaving the logger plugged into your computer for an
extended period of time will considerably lower its battery life. A periodic
check of system calibration is recommended. The Model DW-USB-LITE
is not field serviceable and should be returned if repair is needed (field
repair should not be attempted and may void warranty). Be sure to include
a brief description of the problem plus any relevant application notes. Contact
customer service to receive a return goods authorization number before
shipping.
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
©Copyright 2013 Dwyer Instruments, Inc. Printed in U.S.A. 9/13 FR# R6-443579-00 Rev. 1