Apple Ethernet CS II Card - Manual (Page 11)

11
Setting your control panels for Ethernet
You must next set the AppleTalk and TCP/IP control
panels for Ethernet.
Setting the AppleTalk control panel
A Macintosh computer’s AppleTalk network
connection is preset for LocalTalk connected to
either the printer port or the modem port. To connect
to an Ethernet network using AppleTalk, you need to
change the setting in the AppleTalk control panel.
Follow these steps:
1. Choose Control Panels from the Apple (
K
) menu.
2. Double-click the AppleTalk control panel to open it.
3. Choose Ethernet from the pop-up menu.
(You may have different network-connection
choices from those shown in the figure.)