Apple Ethernet CS II Card - Manual (Page 9)

9
To install Ethernet software:
1. Insert the PCI Network Installer disk in your
Macintosh and double-click the disk’s icon to open it.
The Apple Ethernet CS II cards require the
versions of software supplied on the PCI Network
Installer disk.
2. Open the Installer program, review the Welcome
screen, and click Continue.
The Easy Install dialog box appears.
3. Make sure that the disk indicated in the Installer’s
dialog box is your current startup disk. Then
click Install.
If you see a message indicating that the software
cannot be installed while other programs are
running, click Continue.
4. When you see a message reporting that the
installation was successful, click Restart.
Before you can use services on an Ethernet
network, you need to specify that you’re using an
Open Transport network configuration. You then
set two control panels for Ethernet networking.
The next section shows how.