Innotech iSEA - Manual (Page 27)

Page 27
Innotech Service & Event Analyser Installation Instructions
© Mass Electronics Pty Ltd 2011 Chapter 3 – Configuring iSEA
Figure 3-11: iSEA Devices loaded in iComm
Figure 3-12: Open FM Builder
Connection List Window
Devices Loaded List Window
6. The second device is named ‘Chronicle Server’, and will only be alive when iSEA has
connected to Chronicle Server. There will be 6 blocks loaded for this device as shown below
in Figure 3-11.
7. Open FM Builder, and create a new project or open an existing one.