NORD Drivesystems MI0700 - Manual (Page 79)

5 Additional information / Appendix
MI 0700 GB-0414 79
Pos : 91 /Anl eitungen/ Elektroni k/Z us atzi nf ormati onen/ X.2 Sof t war e @ 3 \ mod_1376989105281_388.doc x @ 86936 @ 2 @ 1
5.2 Software
The software listed below can be downloaded on the homepage www.nord.com (main page ->
Documentation -> Software).
Information Software
Getriebebau NORD GmbH & Co. KG will not assume liability for installation and operation of NORD CON,
NORDAC options software and NORD EPLAN MACROS!
Pos : 92 /Anl eitungen/ Elektroni k/Z us atzi nf ormati onen/ X.2.1 NORD CON @ 3\ mod_1376994629005_388. doc x @ 87220 @ 3 @ 1
5.2.1 NORD CON
You can download a PC application from www.nord.com for
programming and operating the SK 5xxE and SK 2xxE series of
frequency inverters.
NORD CON Version 2.0 can set up parameters of starters, frequency
inverters as well as technology units and customer units.
For further information please refer to the link below.
Software Description Version
NORD CON
NORD CON is a PC program to control and parameterise frequency inverters
manufactured by NORD GmbH & Co. KG.
Communication with the frequency inverter occurs via the serial SUB-D9 interface
of the PC or a commercially available USB connected to a USB port.
≥ 2.2
Pos : 93 /Anl eitungen/ Elektroni k/Z us atzi nf ormati onen/ X.2.2 NORD AC Options @ 3\ mod_1377595552158_388. doc x @ 91271 @ 3 @ 1
5.2.2 NORD options
For planning and programming the various bus system options, several
software files can be downloaded from
www.nord.com for the SK 5xxE
series of frequency inverters allowing for integration into a wide range
of automation systems.
NORDAC Options contain device-specific information and parameters
necessary for connecting bus-specific field bus options (technology
units and customer units) of NORD frequency inverters to the currently
used bus system.
For more information, please refer to the link below or the pertaining
"readme" text files.