ROTRONIC HygroLog HL-NT - Manual (Page 20)

IN-E-HL-NT-V2_12
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroLog HL-NT data logger:
instruction manual Instruction Manual
Document Type
Page 20 of 48
Document title
© 2009-2012; Rotronic AG IN-E-HL-NT-V2_12
3.2 Installation
Installation is the same for all models of docking station.
To mount the docking station to a wall, use
the two holes shown on the right. The
HygroLog NT can then be attached to the
docking station as explained below.
To attach the HygroLog NT to the
docking station:
Place the HygroLog NT on the
docking station so as to match the
two areas [A]. Press lightly one
against the other and secure the
assembly with threaded pin [B].
When the docking station is
mounted on a wall, a small
padlock (not shown) may be put
through pin [B] to prevent removal
of the HygroLog NT from the
docking station.
[B]
[B]
[A]