ROTRONIC HygroLog HL-NT - Manual (Page 36)

IN-E-HL-NT-V2_12
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroLog HL-NT data logger:
instruction manual Instruction Manual
Document Type
Page 36 of 48
Document title
© 2009-2012; Rotronic AG IN-E-HL-NT-V2_12
To cancel an alarm when the latching mode is enabled:
- Use the UP or DOWN key to highlight the line that says [Cancel Alarm].
- Press on the ENTER key.
8.5.5 Instrument
This menu item provides information on the HygroLog HL-NT. No changes can be made from
within this menu item.
● Release: firmware release
● S/N: serial number
● Address (network address of the logger)
● Baud rate: serial transmission rate
● Battery: % remaining battery capacity (automatically reset to 100% after replacing the battery)
● Ext. Power: No (not connected), Yes (connected)
● Name: custom name specified by the user for the logger (max. 30 characters)
Press the ENTER key to exit this menu item
8.5.6 Inputs
This menu item provides information on the inputs of the HygroLog HL-NT and optional docking
station. No changes can be made from within this menu item. Information is shown one input at a
time. The input number appears on the top of the screen and can be changed with the up-arrow
or with the down arrow key.
● Status: Connected / Not Detected - shows if a probe is connected or not
● Name: custom name specified by the user for the input (max. 12 characters)
● Release: firmware release of the probe (HygroClip probes only)
● S/N: serial number of the probe (HygroClip probes only)
● Logging: status of the logging function for the input being displayed
- scheduled: data from the input is scheduled to be logged at a future time
- active: data from the input is being logged
- inactive: no input data is being logged or scheduled to be logged
8.5.7 Docking station
This menu item provides information on any docking station with internal electronics that is
attached to the HygroLog HL-NT. No changes can be made from within this menu item.
● Status: Connected / Not Detected
● Release: firmware release of the docking station
● S/N: serial number of the docking station