ROTRONIC XB OEM - Manual (Page 17)

E-M-XB-V1_10
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
Instruction Manual
Document Type
XB Humidity Temperature Transmitter
User Guide
Document title
Page 17 of 27
© 2008; Rotronic AG E-M-XB-V1_10
Terminal block diagram
Measuring humidity or temperature only
Operation of the XB3 does not require both current loops to be closed. When using the XB3 to measure either
humidity only or temperature only, close only the loop that is being used.
Using the ROTRONIC HW4 software, any unused output of the XB3 can be disabled.
Terminals Description
K1-1: OUT1 Relative humidity or dew point (+)
K1-2: OUT2 Temperature output (+)
K1-3: GND Ground (tied with other GND)
K2-1: PWR
Power supply: 15…40 VDC (+)
or 12…28 VAC (Phase)
K2-2: GND
Power supply (-) or neutral
(tied with other GND)