E-m-xb-v1_10, Xb humidity temperature transmitter user guide – ROTRONIC XB OEM User Manual
Page 5
E-M-XB-V1_10
Rotronic AG
Bassersdorf, Switzerland
Document code
Unit
Instruction Manual
Document Type
XB Humidity Temperature Transmitter
User Guide
Document title
Page 5 of 27
© 2008; Rotronic AG E-M-XB-V1_10
1
2
3
4
5
6
Probe length options
S
Standard length : 100 mm
1
Standard length + 150 mm
2
Standard length + 300 mm
3
Standard length + 450 mm
4
Standard length +600 mm
Standard dew / frost point output ranges
X X
No calculated parameter
B X
-50…50 (°C / °F - as per temperature output range)
C X
-50…100 (°C / °F - as per temperature output range)
D X
-50…200 (°C / °F - as per temperature output range)
S C
Custom range. Specify when ordering
Notes:
o
Output 1: relative humidity or dew point
o
Output 2: temperature
o
The dew / frost point range uses the same unit (˚C or ˚F) as the temperature output. The factory default
setting is frost point below freezing.
o
Custom range: be sure to clearly specify the desired range at the time of the order. When a special range
has been ordered, the letters ST and SC are used in columns 4 and 7 in the above table. These generic
codes will be replaced with a specific code only for quantity and repeat orders