ROTRONIC HF5 - Manual (Page 29)

E-M-HF5-V2_12
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroFlex HF5 Humidity Temperature
Transmitters: User Guide Instruction Manual
Document Type
Page 29 of 36
Document title
© 2009-2013; Rotronic AG E-M-HF5-V2_12
Main Menu Menu Items Selections / Information Notes
Type Device type
Name Device name User defined
Probe Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Name Device name User defined
Other HF5 models:
Main Menu
Menu Items Selections / Information Notes
Device Settings
Units Metric / English
Back Light Key Press / On / Off Display backlight mode
Contrast LC display contrast adjustment
Trend On / Off Trend indication on the display
Device Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Type Device type
Name Device name User defined
Probe Information
Version Firmware version
Serial Nbr Serial number
Address RS-485 address
Name Device name User defined
SensorTest Humidity sensor status Off / Good / SQ-Tuned / Bad
Record On / Off
Data recording by the probe
(max. 2000 values)
Humidity Adjust
RefValue Humidity reference value ± 0.1 %RH steps
Acquired
Number of cal. points in probe
memory
<Acquire> Save cal. point to probe memory
<Delete> Erases all calibration points
<Adjust>
Effect depends on number of
calibration points
Temperature Adjust
RefValue Temperature reference value ± 0.1 ˚C steps
<Adjust> 1-point adjustment only (offset)
o
Record: both the recording mode (start / stop and the log interval cannot be changed from the menu and
are as configured with the ROTRONIC HW4 software