Sterlco SDA Series Medium Capacity Dehumidifying Dryer User Manual
Page 46
Cabinet Series Dehumidifying Dryer
46
Option Type
RE232C
RS-485
Event Input
Transfer Output
Board Number
E53-CK01
E53-CK03
E53-CKB
E53-CKF
Mode Parameter
Setting
range
Default
Factory
setting
Option Eu-A Multi-SP Function
0/1
0
Default
Option Eu-1 Event Input Assign 1
STOP/MAN
STOP
Default
Option SbCE Communication Stop Bit
½ BITS
2
Default
Option Len Comm. Data Length
7/8 BITS
7
Default
Option PrEY Commication Parity
None/Even/Odd
Even
Default
Option 6PS Comm. Baud Rate
1.2/2.4/4.8/9.6/19.2
9.6 kbps
Default
Option U-n6 Comm. Unit No.
0 to 99
0
Default
Option Er-E Transfer Output Type
SP/SP-M/PV/O/C-O
SP
Default
Option Er-H Xfer Output Upper Limit
5
5
Default
Option Er-L Xfer Output Lower Limit
5
5
Default
Restoring Factory Defaults on the Dew Point Controller
1. Make sure jumper setting for input type is set for Current Input (I), right jumper.
2. Return controller to housing.
3. Press the Display button for one (1) second to enter Menu Display.
4. Press the Arrow Up button to switch between menus.
5. To switch parameters within a menu, press Up Arrow button.
Figure 9
Setting List for Dew Point Controller, Part No. A0548567
Mode Parameter
Setting
range
Default
Factory
setting
Protect SECr Security
0 to 6
1
3
Protect YEYP A/M Key Protect
ON/OFF
OFF
ON
Manual Manual MV
-5.0 to 105.0 %
0.0
Default
Level 0 SP Set Point
SP lower limit to upper limit EU
0
Default
Level 0 r-S Run/Stop
Run/Stop
Run
Default
Level 1 AL-1 Alarm Value 1
-1999 to 9999 EU
0
-10.0
°F/-23°C
Level 1 AL-2 Alarm Value 2
-1999 to 9999 EU
0
-10.0
°F/-23°C
Level 1 C-db Dead Band
-19.99 to 99.99%FS
0.00
Default
Level 1 HYS Hysteresis (Heat)
0.01 to 99.99% FS
0.10
Default
Level 1 CHYS Hysteresis (Cool)
0.01 to 99.99 FS
0.10
Default
Level 2 SPrU Sp Ramp Time Unit
M(Minutes)/H(Hours)
M
Default
Level 2 SPrt Sp Ramp Set Value
0 to 9999 EU
0
Default
Level 2 CnF Input Digital Filter
0 to 9999 SEC
0
Default
Level 2 ALH1 Alarm 1 Hysteresis
0.01 to 99.99%
0.02
Default
Level 2 ALH2 Alarm 2 Hysteresis
0.01 to 99.99%
0.02
Default
Level 2 Cn5H input shift upper limit
-199.9 to 999.9
°C
0.0 Default