Sterlco SDD Series - Manual (Page 10)

882.01749.00 10 of 93
Figure 2. “Duo” Dual Station Digital Dosing Feeder
2-1 A250 Controller
The Digital Dosing additive feeder consists of a controller(s), dosing motor(s), and dosing module(s).
The controller is used to:
Configure the feeder to the desired process.
Calibrate the feeder.
Run, monitor, and stop the dosing (feeding) process.
Enter, recall, and run recipes.
Troubleshoot problems via touch screen.
A touch screen is used to enter, modify, and display data.
The control system is switched “On” (position “1") with the “On/Off” switch.