Sterlco SDD Series - Manual (Page 25)

25 of 96
“DT” Pellet & Regrind Discs
“DP” Powder Discs
Feeder Configuration – Extrusion follower:
Touch the ACS logo on the main menu screen to access the configuration menu. See section # for
details.
Feeder Type Selection. Select extrusion follower.
Select press signal type, 0-10V, 0-20mA, or 4-20mA.
Disc
Thickness
Disc
Calibration
Number
No. of
Pockets
10 mm
DT 30-101820 32.00 20
DT 30-102025
(“Sure-shot” - 20
oval holes) 38.00
20 Oval
20mm
DT 30-203012 100.00 12
DT 30-204010 175.00 10
Disc
Calibration
Number
Disc
Thickness
DP 30-050940
17.00
5mm
DP 30-250940 8.00 2.5mm