Sterlco SDD Series - Manual (Page 47)

47 of 96
Screen 8.
The tray should be removed from the calibration chamber. The access cover should be replaced /
closed. Weight Calibration is complete. Note that at any time in the process, the “Menu” button may be
pressed to abort the weight calibration process. Any sample weights, if any, are used to calculate the average
weight. If no sample weights are entered, the calibration weight is used for calculations. Using less than 5
samples may affect feeder accuracy.
3-5 Status screens
Status Screens
The status screens reflect the state of the feeder during operation. The status screens are accessed by
pressing the “Status” button on the main menu.
Prerequisites.
Before the status screens can be displayed, the current recipe must be valid & complete.If the current
recipe is not valid, an advisory screen is displayed :
Invalid Recipe: