Safety, Overview, Save these instructions – American Power Conversion PDU User Manual

Page 9: Safety symbols used in this manual, Cross-reference symbols used in this manual

Advertising
background image

150kW InfraStruXure System—Installation and Start-Up

1

Safety

Overview

Save these instructions

This manual contains important instructions that must be followed during installation, operation, and
configuration of the InfraStruXure system.

Safety symbols used in this manual

Cross-reference symbols used in this manual

Electrical

Hazard

Indicates an electrical hazard, which, if not avoided, could result in injury or
death.

Warning

Indicates a hazard, which, if not avoided, could result in personal injury or
damage to the product or other property.

Caution

Indicates a potential hazard which could result in damage to product or other property.

Note

Indicates important information.

Heavy

Indicates a heavy load that should not be lifted without assistance.

Indicates a standby state. When in standby, the unit is not operating, but it may still
contain hazardous voltage. It is not safe to service until the equipment is disconnected
from all sources of electrical power.

Indicates that more information is available on the same subject in a different section of
this manual.

See also

Indicates that more information is available on the same subject in a different manual.

Advertising