Actiontec electronic MEGAPLUG HPAP108T - Manual (Page 11)

8
Actiontec MegaPlug Wireless Network Extender User Manual
9
Chapter 3 Using the Configuration Utility
Setup Wizard
The Setup Wizard allows a quick set up of the Extender’s basic settings. To use:
1. Click Setup Wizard in the Utility window. A “Login” window appears. Enter
the user name and password (default user name is “admin”; default password
is blank [no password]) in the appropriate text boxes, then click Next.
2. An “ IP Setting” window appears. Select the appropriate setting (for more
details, see “ IP Setting” below), then click Next.
3. An “Device Name” window appears. Enter a name for the Extender in the
appropriate text box, then click Next.
4. A “Wireless Setting” window appears. Select the appropriate configuration for the
Extender (for more details, see “Wireless Setting” on page 9), then click Next.
5. A “Wireless Security” window appears. Select the appropriate security con-
figuration for the Extender (for more details, see “Security” on page 10), then
click Next.
6. Another window appears, relevant to the security setting. Enter the pertinent
information, then click Finish. The Setup Wizard is complete.
IP Setting
Clicking IP Setting in the Utility window generates a Login window. After enter-
ing the proper user name and password (default user name is “Admin,” and
default password is blank [enter no password]), the “
IP Setting” window appears.
There are two options in this window: Obtain an IP address automatically, and
Specify an IP address.