Actiontec electronic MEGAPLUG HPAP108T - Manual (Page 52)

48
Actiontec MegaPlug Wireless Network Extender User Manual
49
Chapter 7 Setting Up File and Printer Sharing
7. Click OK. The Network window reappears.
8. In the Network window, select Identification. The “Identification” tab
appears.
9. In the “Computer Name” text box, type a name different than the other com-
puters on the network.
10. In the “Workgroup” text box, enter the network workgroup name. This is the
same on each computer on the network.
11. Enter any description in the “Computer Description” text box. Traditionally,
the location name or main user’s name is entered.
12. Select Configuration to display the Configuration window again.
13. In the “Primary Network Logon” text box, make sure “Client for Microsoft
Networks” is entered. If not, click the down arrow and select it from the list.
14. Click OK. A “System Settings Change” window appears. Click Yes.