Ip settings, Wireless network, 16 wireless network – Actiontec electronic MEGAPLUG HPAP108T User Manual
Page 19
16
Actiontec MegaPlug Wireless Network Extender User Manual
17
Chapter 4 Using the Web Configuration Interface
IP Settings
Clicking IP Settings on the left side of any Interface screen causes the “
IP
Settings”
screen to appear. There are two options in this window: Obtain an IP address
automatically, and Specify an IP address.
Obtain an IP Address Automatically
Select this option (by clicking the appropriate radio button) to have the Extender
obtain an
IP
address automatically from a router on the Homeline etwork.
Specify an IP Address
Select this option (by clicking the appropriate radio button) to specify an
IP
address. After selecting this option, enter the
IP
address, subnet mask address, and
default gateway address in the appropriate text boxes.
Wireless Network
Clicking Wireless Network on the left side of any Interface screen causes the
“Wireless Network” screen to appear. Here, the Extender’s wireless settings can
be configured.