Actiontec electronic MEGAPLUG HPAP108T - Manual (Page 32)

29
Setting Up Static
IP Address
To communicate with a Wireless Network Extender from a computer on the net-
work, the user may have to switch the
IP address settings from DHCP -enabled to
static IP , so that the computer and the Extender are on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Extender’s
factory default IP address. If the Extender’s IP address has been
changed, enter the new IP address when instructed to enter an
IP address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
6