Actiontec electronic MEGAPLUG HPAP108T - Manual (Page 41)

38
Actiontec MegaPlug Wireless Network Extender User Manual
39
Chapter 6 Setting Up Static IP Address
7. The “Local Area Connection Properties” window appears. Click General.
8. In the “Components checked are used by this connection” list box, double-
click Internet Protocol ( TCP/IP ).
9. The “Internet Protocol ( TCP/IP ) Properties” window appears.
10. In the General tab, make sure the circle next to “Use the following IP Address”
is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
11. Enter the following numbers in the “ IP Address” text box:
192.168.0.2
Press the space bar on the keyboard to add the periods between the numbers.