Brother XL-5130 5232 5340 - Manual (Page 9)

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1
CONTENTS
KNO
WING Y
OUR
SEWING MA
CHINE
STRAIGHT AND
ZIGZA
G STITCHING
B
UIL
T
-IN STITCHES
BUTT
ONHOLE AND
B
UTT
ON SEWING
USING A
T
T
A
CHMENTS
AND APPLICA
TIONS
MAINTENANCE
INDEX
PRINCIPAL PARTS
1 Bobbin winding assembly
Winds the thread onto the bobbin to be used for the lower thread.
2 Spool pin
Holds the spool of thread.
3 Bobbin winding tension disc and thread guide
4 Thread take-up lever
5 Thread cutter
6 Upper tension control dial
Controls the tension of the upper thread.
7 Stitch width dial
Controls the stitch width.
8 Pattern selection dial
Turn in either direction to select the desired stitch.
9 Stitch length dial
Controls the length of the stitches.
0 Reverse sewing lever
Push for stitching in the reverse direction.
A Buttonhole fine-adjustment screw
B Buttonhole lever (1 Step automatic buttonhole)
C Handle
D Balance wheel
Turn toward you (counterclockwise) to raise and lower the needle.
E Main power/sewing light switch
Turns the main power and sewing light on and off.
F Foot controller receptacle
Insert the foot controller plug for operation.
G Presser foot lever
Raises and lowers the presser foot.
H Foot controller
Used to control sewing speed start and stop.
2 1
B
4
5
0
9
7
8
A
H
E
F
C
G
3 6
D