Brother SB7050E - Manual (Page 89)

Troubleshooting 87
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
9 The memory is full and the pattern cannot be saved.
10
You pressed the back key or the embroidery key when a pattern was
selected.
11
You tried to select an embroidery pattern or change the layout when
the needle was down.
The machine is turned on while the needle is lowered and the
embroidery unit is attached.
12
You tried to initialize the embroidery unit with the embroidery foot
lowered.
13
A pattern was being retrieved from a USB flash drive (USB flash
memory) containing more than 200 embroidery patterns (including
folders).
In addition, this message will appear if embroidery patterns containing
many colors have been saved on the USB media, even if it contains
data for no more than 200 patterns (including folders).
14
The start/stop button was pressed after selecting a pattern which is
saved in the machine's memory or entered from the USB port without
pressing
(Retrieve key).
15
The needle position button or thread cutter button was pressed while
the bobbin winder shaft is moved to the right.
16 A pattern is being saved.
17 The start/stop button was pressed when no pattern is selected.
No Error Message Probable Cause