Upgrading your machine’s software using usb media – Brother SB7050E User Manual

Page 92

Advertising
background image

90

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Upgrading Your Machine’s Software Using USB Media

You can use USB media and a computer to download software upgrades for your sewing machine.
When an upgrade program is available on our website at " http://solutions.brother.com ", please download
the file(s) following the instructions on the website and steps listed below.

Note

z When using USB media to upgrade the software, check that no data other than the upgrade file is saved

on the USB media being used before starting to upgrade.

z Upgrade file can be retrieved from a USB flash drive (USB flash memory) of any size.

a

a

Press and hold the

(Help key) while

turning on the machine.

X

The following screen appears.

b

Insert the USB media into the USB port on the
machine. The media device should only
contain the upgrade file.

a USB port for media
b USB media

Note

z When using USB media equipped with an

access indicator, the access indicator will
begin flashing after the media is inserted into
your computer or machine, and may take
about 5 to 6 seconds before the media is
recognized. (The length of time differs
depending on the USB media.)

c

c

Press .

X

The following screen appears.

Note

z If an error occurred, a text error message will

appear. At this time, turn the machine off,
and then start the procedure again from step

a

.

d

d

When the following screen appears, upgrading
is completed.

e

Remove the USB media, and turn the machine
off and on again.

Advertising