Audiovox FPE-1908DV - Manual (Page 12)

E - 12
CONNECTIONS
CONNECTING A TV ANTENNA/CABLE/SATELLITE
To view television channels correctly, a signal must be received from one of the following
sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Satellite, cable, or
TV antenna cable
to TV ANTENNA
terminal (not
included)
CONNECTING AN A/V DEVICE
Connecting to Devices with an S-Video Output
To connect to A/V devices such as a VCR, camcorder, satellite system or cable, etc.
Connecting to a VCR / Camcorder
/ Satellite System / Cable
Connect the AUDIO and S-VIDEO
cable (not included) as shown.
Make sure you connect the cable
from the other equipment (AUDIO
OUT and S-VIDEO OUT) to this
unit (AUDIO IN and S-VIDEO IN)
Note:
Please refer to the user manual
for the other equipment for more
information.
To AUDIO
IN jacks
(AV IN)
To S-VIDEO jack
(AV IN)
To AUDIO OUT and
S-VIDEO OUT jacks
Connecting a Digital Antenna
The tuner in this TV receives ATSC TV
signals from an antenna.
This digital TV can receive standard
(SDTV) and high definition (HDTV)
over the air broadcasts.
Connecting an Analog Antenna
or Device
The tuner in this TV receives NTSC TV
signals, analog cable signals or the RF
output from a satellite receiver, VCR
or cable box.
English P1-32.indd 12 6/11/2008 12:22:18 PM