Audiovox FPE-1908DV - Manual (Page 16)

E - 16
INSTALLATION
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3 15/16”
x 3 15/16” (100mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount
this unit according to the directions included with the mounting kit.
Note: You must remove the base stand before mounting the unit on the wall.
REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing
the base stand. Be sure that nothing hard or sharp, or anything that could scratch or damage
the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any
time because the screen could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the back side is facing up, making sure to place a soft
cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the unit.
3 15/16”
3 15/16”
Four mounting
holes
English P1-32.indd 16 6/11/2008 12:22:23 PM