Audiovox FPE-1908DV - Manual (Page 23)

E - 23
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to
limit operation during playback. For example, many DVDs do not allow users to skip government
warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the
instruction notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is
not permitted by the unit or disc.
PLAyING A DISC
1. Press the STANDBy/ON button to turn the unit on.
2. Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle, with the label side facing
the front, until you hear a “click”.
5. Push the disc door gently to close it. It takes a short while for your unit to load the
disc. After loading, for most DVDs, the unit will automatically take you main menu or
start playing. If the unit does not automatically start playing the DVD, press the PLAy
button.
PLAyING A PICTURE FILE DISC
This unit can play picture files recorded on CD-R and CD-RW discs.
1. Press the PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing
the front, until you hear a “click”.
3. Push the door gently to close it. The picture files on the disc will be displayed one by
one automatically.
4. Press the STOP button to go to the folder list.
5. Press the or button to highlight a file to play. Press the PLAy button to start
playback.
Note:
• You can press the PAUSE button to interrupt playback, and press the PLAy button
to resume playback.
• You also can use the GOTO function or use the numbered buttons to enter the image
number to quickly select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by
90°.
PAUSING PLAYBACK (STILL MODE)
Press the PAUSE button. To resume normal playback, press the PLAy button. Each time
you press the PAUSE button, the picture advances one frame.
SKIPPING TO A DIFFERENT TRACK
• Press the PREV button to go back to previous chapters/tracks.
• Press the NEXT button to advance chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to go directly to that
track number.
STOPPING PLAYBACK
Press the STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the PLAy button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the
PLAy button will reset the disc to the beginning.
CD/DVD OPERATION
English P1-32.indd 23 6/11/2008 12:22:28 PM