Connections, Connecting a pc, Connecting a high-definition (hd) source – Audiovox FPE-1908DV User Manual
Page 14
 
E - 14
CONNECTIONS
CONNECTING A PC
Connect	the	15-pin	D-SUB	PC/VGA	connector	from	your	computer	to	the	15-pin	D-SUB	PC/
VGA	input	on	this	unit	using	a	monitor	cable	and	audio	cable	(not	included)	as	shown.
CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Definition	(HD)	Devices	with	component	video	output	must	be	connected	to	the	YUV	
input.
Connect	the	component	video	cable	and	audio	cable	(not	included)	as	shown.
Make	sure	you	connect	the	component	video	cable	and	audio	cable	from	the	other	equipment	
(COMPONENT VIDEO OUT	and		AUDIO OUT)	to	this	unit	(COMPONENT VIDEO IN	and		
AUDIO IN - yUV IN).
* May require a subscription
for receiving HD channels.
Check with your cable/
satellite service provider for
details.
To AUDIO IN
jacks
(yUV IN)
To AUDIO
OUT jacks
To COMPONENT
VIDEO IN jacks
(yUV IN)
To COMPONENT
VIDEO OUT jacks
Note: 
When	connecting	a	DVD	player	to	the	television,	the	picture	resolution	is	solely	dependent	upon	
the	resolution	supported	by	the	DVD	player	attached.	DVD	player	resolutions	vary	from	480i	to	
1080i,	and	this	television	can	support	DVD	players	up	to	a	maximum	resolution	of	1080i.		
Make	 sure	 you	 connect	 the	
cable	 from	 the	 computer	 (PC 
Connector	 and	 AUDIO - PC 
OUT)	to	this	unit	(MONITOR / 
VGA	and	AUDIO - PC IN).
To AUDIO jack (PC OUT)
To PC connector
English P1-32.indd 14
6/11/2008 12:22:21 PM