Setting the camera angle, Launching the camera angle setting tool, Connecting to the camera – Canon VB-M600VE User Manual

Page 32: Setting the camera angle -2, Launching the camera angle setting tool -2, Connecting to the camera -2

Advertising
background image

3

-2

Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture

orientation according to the situation.

You can set zoom, focus and exposure compensation.

You can set pan, tilt, rotation, zoom, focus and exposure compensation.

Launching the Camera Angle Setting Tool

Connecting to the Camera

The [Connection settings] dialog box will appear.

[Host Name]
Enter the host name or IP address of the camera (p. 2-6).

[Administrator User Name]
Enter the administrator user name for the camera

(p. 2-6).

[Administrator Password]

Enter the administrator password for the camera

(p. 2-6).

[Enable SSL Communications]
Select this checkbox to connect to the camera using

SSL communications. Normally SSL communications

are not used (factory default setting) (p. 5-29).

[Port]
Set the HTTP port number to 80, 443 or in the range of

1024 to 65535. Normally [80] (factory default setting)

is used (p. 5-19).

Setting the Camera Angle

Important

• The Camera Angle Setting Tool is included for angle adjustment during camera installation only and is not intended for daily use.

Overuse may cause the camera to malfunction.

• After changing settings in the Camera Angle Setting Tool, check the settings in the Setting page and Admin Tools operate as intended.

• The Camera Angle Setting Tool cannot be used via a proxy server.

• Upload functions cannot be used while the Camera Angle Setting Tool is connected.

1

Double-click the Camera Angle Setting Tool icon on
the desktop to launch the Camera Angle Setting Tool.

1

Click [Connect] from the [File] menu.

2

Enter each item for the camera to connect to and click

[OK].

Advertising
This manual is related to the following products: