Canon RC-V100 - Manual (Page 12)

12
25 WHITE BALANCE R (R gain) dial
26 WHITE BALANCE B (B gain) dial
These dials adjust, respectively, the R gain and B gain of the white balance settings.
By default, the operating mode of the dials is set to relative mode (A 16). You can
change the direction in which you need to turn each dial and its sensitivity to your
preference (A 16).
NOTES
• Only one of the four buttons AWB, A, B and PRESET can be selected at the same time.
27 MASTER BLACK R dial
28 MASTER BLACK B dial
These dials adjust, respectively, the red and blue settings of the master black.
By default, the operating mode of the dials is set to relative mode (A 16). You can
change the direction in which you need to turn each dial and its sensitivity to your
preference (A 16).
Zoom and focus controls
29 FOCUS/ZOOM ACTIVE indicator
This indicator lights up in green when the key lock mode has been set so only the
zoom and focus controls of the remote controller are active.
NOTES
• Immediately after selecting the Only zoom/focus controls active mode, this indicator
may flash momentarily. During that time, the controls cannot be used; please wait
until the indicator lights up permanently to use the remote controller.
30 ZOOM dial
This dial adjusts the zoom. The zoom speed is variable: the greater the rotation angle
off the center, the faster the zoom will be. To end the zoom operation, return the dial to
the center.
You can change the direction in which you need to turn the dial and its sensitivity to
your preference (A 16).
31 AF (autofocus) button
This button toggles the focus mode between manual focus and autofocus. For details
about settings related to the camcorder’s lens or a lens attached to the camcorder,
please refer to the Instruction Manual of the camcorder used.
When the focus mode is set to autofocus, the button lights up in orange.
29
30
31
32
COP
Y