Canon RC-V100 - Manual (Page 8)

8
Basic operations
1 CAMERA POWER button
Turns the camcorder on/off. The camcorder’s operating mode is determined by the
position of the camcorder’s Q switch. If the camcorder’s Q switch is set to
OFF, the camcorder cannot be turned on using the remote controller.
You can check if the camcorder is on or off by the button’s light: The button flashes
quickly (2 to 3 times per second) while the remote controller is connecting to the
camcorder. When the connection is completed correctly, the button lights up in green.
When the camcorder is in power save mode or lens exchange mode, the button
flashes slowly (once per second) in green.
NOTES
• When the remote controller cannot correctly connect to the camcorder, the
CAMERA POWER button will keep flashing quickly. Check that the remote controller
is connected to a compatible camcorder and that use of the remote controller has
been correctly activated on the camcorder (A 5).
2 Up / Down / Left / Right / SET buttons
Use these buttons to operate the camcorder menus and select settings. Press the
navigation buttons to move the orange selection frame in the various menu screens.
Press the SET button to select a menu setting.
3 MENU button
Opens and closes the menu.
4 CANCEL button
Press the button to return to the previous submenu or to interrupt some operations
while they are in progress.
5 ONSCREEN (output onscreen displays) button
Turns on/off the overlaying of the camcorder’s onscreen displays on video output from
the camcorder’s terminals.
6 START/STOP button
Starts and stops video recording. Same function as the corresponding button on the
camcorder.
While the camcorder is recording, the button lights up in red.
1
2 3 5 4 6
7
8
9
COP
Y